Makassar, Sulawesi Selatan (0411) 455696 mail@eng.umi.ac.id

Profil

Setelah menyelesaikan S1 Teknik Mesin tahun 1996 segera menjalankan peran profesional sebagai Mechanical Engineer pada proyek konstruksi pada perusahaan nasional dan multinasional, kemudian melanjutkan pendidikan Magister di Curtin University of Technology atas beasiswa pemerintah Australia tahun 2006. Setelah kembali ke tanah air berkarir sebagai konsultan pendidikan Luar Negeri sebelum kemudian melanjutkan pendidikan Doktoral di Oita University, Jepang. Setelah selesai S3 tahun 2013, kembali berkarir di kampus sebagai dosen dengan fokus penelitian pada karakterisasi dan kegagalan material industri, terutama yang beririsan dengan fatigue, akustik, kesehatan dan energi terbarukan.

Dengan pengalaman sebagai praktisi dan pengajar, kemudian dikontrak sebagai Peneliti Madya pada Badan Riset dan Inovasi Nasional (BRIN) sambil tetap mengajar di Departemen Mesin Fakultas Teknik Universitas Muslim Indonesia. Aktif dalam berbagai kegiatan ilmiah nasional dan internasional, termasuk mendapatkan hibah skema penelitian dan pengabdian masyarakat dari Kemenristek DIKTI, lembaga multinasional maupun pembiayaan mandiri.

Bidang Keahlian

  • Teknik Mesin

Riwayat Pendidikan

  • • Ir - UMI 2023
  • S1 Unhas 1996
  • S2 Curtin University of Technology 2006
  • S3 Oita University 2013

Mata Kuliah Diampu

  • Bahasa Inggris Teknik
  • Perawatan Mesin-Mesin
  • Perpatahan dan Kelelahan
  • Statistik
  • Metode Penelitian
  • Teknik Penyambungan Logam

Rekam Jejak

Publikasi Terindeks

46 karya

2026 1

  1. Effect of Cooling Media on the Hardness and Microstructure of AISI 1020 Steel in the SMAW Welding Process

    Journal of Mechanical Engineering

    OpenAlex Open Access

2025 5

  1. Synthesis, physical characteristics, and biocompatibility test of chitosan-alginate-fucoidan scaffold as an alternative material for alveolar bone substitution

    BMC Oral Health

    Q1 Scopus 10 sitasi
  2. Investigating the Impact of Environmental Noise, Humidity and Surface Treatment on Mosque Acoustic Performance in Makassar, Indonesia

    Journal of Design and Built Environment

    Q2 Scopus 3 sitasi
  3. ANALYSIS OF THE IMPACT OF VEHICLE DENSITY ON CARBON MONOXIDE CONCENTRATION IN THE VICINITY OF THE TELLO DIESEL POWER PLANT IN MAKASSAR, INDONESIA

    Arpn Journal of Engineering and Applied Sciences

    Q4 Scopus 2 sitasi
  4. Characteristics of Chicken Feather Panels as an Alternative Insulation Material

    Civil Engineering and Architecture

    Q2 Scopus Open Access DOI
  5. Pengaruh Pola Permukaan pada Absorption Coefficient Material Aluminium

    Innovative: Journal Of Social Science Research 5 (4), 8053-8061, 2025

    Google Scholar

2024 3

  1. Measurement of Carbon Monoxide Concentrations During the Community Activities Restrictions Enforcement Level 4 in the Covid-19 Pandemic in Makassar City, Indonesia

    Aip Conference Proceedings

    Q4 Scopus 2 sitasi DOI
  2. Analisis Potensi Biogas Kotoran Sapi

    Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi 10 (2), 546-552, 2024

    Google Scholar 1 sitasi
  3. CHICKEN FEATHER: AN ALTERNATIVE OF ACOUSTICAL MATERIALS

    International Congress on Sound and Vibration (ICSV)

    OpenAlex DOI

2023 8

  1. IMPLEMENTASI PENYARINGAN AIR SEDERHANA UNTUK PEMENUHAN AIR BERSIH MASYARAKAT DESA PUCAK

    Community Development Journal : Jurnal Pengabdian Masyarakat Vol. 4 No. 4 (2023): Volume 4 Nomor 4 Tahun 20238414-8418

    Garuda 10 sitasi
  2. Comparing MPPT Algorithms for Improved Partial-Shaded PV Power Generations

    Jurnal Nasional Teknik Elektro

    Scopus Open Access 4 sitasi DOI
  3. Implementation of PM10 Source Apportionment using Positive Matrix Factorization in Urban Area of Makassar

    Indian Journal of Environmental Protection

    Q4 Scopus 1 sitasi
  4. Sound absorption analysis of carbon steel varied in density and microstructures

    NOISE-CON proceedings

    OpenAlex 1 sitasi DOI
  5. Assessment of Materials on Covid-19 Spread Prevention in Public Buildings

    INTER-NOISE and NOISE-CON Congress and Conference Proceedings 268 (5), 3497-3506, 2023

    Google Scholar DOI
  6. Desain Box Prosesvasi Vacuum dengan Lapisan Tembaga

    Journal of Mechanical Engineering 5 (1), 12-15, 2023

    Google Scholar
  7. Effect of Small Concaves Surface on the Acoustical Characteristics of Chicken Feather Panel

    INTER-NOISE and NOISE-CON Congress and Conference Proceedings 268 (2), 6569-6577, 2023

    Google Scholar DOI
  8. The effect of thickness and surface roughness on the absorption coefficient (α) of Aluminum (Al)

    INTER-NOISE and NOISE-CON Congress and Conference Proceedings 268 (5), 3254-3259, 2023

    Google Scholar DOI

2021 1

  1. ANALISIS KEKUATAN TARIK KOMPOSIT SERAT BATANG POHON WARU (HIBISCUS TILIACEUS)

    OpenAlex

2020 2

  1. Analisis Sambungan Las MIG pada Baja Karbon Rendah Variasi Kampuh Las V, I dan K terhadap Kekuatan Tarik

    Teknik Mesin "TEKNOLOGI" Vol 21, No 1 Okt (2020): Jurnal Teknik Mesin TEKNOLOGI5 - 12

    Garuda
  2. ANALISIS MINYAK JELANTAH SEBAGAI ALTERNATIF BAHAN BAKAR KOMPOR BERTEKANAN

    OpenAlex

2019 6

  1. ANALISA KEKUATAN FATIQUE PADA MATERIAL NON FERRO DENGAN TYPE ROTARY BENDING

    Teknik Mesin "TEKNOLOGI" Vol 20, No 1 Okt (2019): Jurnal Teknik Mesin Teknologi

    Garuda
  2. A Pilot Study on the Sound Absorption Characteristics of Chicken Feathers as an Alternative Sustainable Acoustical Material

    WOS.SCI; WOS.SSCI Edition

    Web of Science Open Access 12 sitasi DOI
  3. Effect of liquid smoke on surface morphology and tensile strength of Sago Fiber

    Journal of Mechanical Engineering and Sciences

    Q2 Scopus Open Access 12 sitasi DOI
  4. Liquid Smoke Potential Solution on Texture and Bonding Sago Fiber-Matrix

    WOS.ISTP Edition

    Web of Science Open Access 5 sitasi DOI
  5. Preliminary study on Acoustical Characteristics of Sago Midrib Composite

    Iop Conference Series Materials Science and Engineering

    Q3 Scopus Open Access 6 sitasi DOI
  6. EFFECTS OF LIQUID SMOKE ON THE CHEMICAL COMPOSITION AND THERMAL PROPERTIES OF SAGO FIBER

    Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University

    Q2 Scopus 1 sitasi

2018 3

  1. Analisis Kekuatan Tarik pada Logam Axle Shaft dengan Pengelasan Gesek (Friction Welding)

    Teknik Mesin "TEKNOLOGI" Vol 19, No 1 Okt (2018): JURNAL TEKNIK MESIN TEKNOLOGI25 - 30

    Garuda
  2. Analisis Kekuatan Sambungan Las Metal Inert Gas (MIG) pada Logam Aluminium Paduan AA6063 dengan Variasi Arus Listrik

    Teknik Mesin "TEKNOLOGI" Vol 18, No 1 Apr (2018): Jurnal Teknik Mesin TEKNOLOGI27 - 32

    Garuda
  3. Analisis Prestasi Mesin Diesel dengan Menggunakan Campuran Solar dengan Minyak Goreng

    Teknik Mesin "TEKNOLOGI" Vol 18, No 1 Apr (2018): Jurnal Teknik Mesin TEKNOLOGI39 - 44

    Garuda

2017 1

  1. Relationship between shear plane of the final pressing and fatigue crack growth behaviour of round-bar specimens of CU processed by ECAP

    International Journal of Computational Methods and Experimental Measurements

    OpenAlex Open Access DOI

2016 3

  1. Effect of Sugar Palm Fiber Surface on Interfacial Bonding with Natural Sago Matrix

    WOS.SCI Edition

    Web of Science Open Access 8 sitasi DOI
  2. Sea Water Effects on Surface Morphology and Interfacial Bonding of Sugar Palm Fiber to Sago Matrix

    Key engineering materials

    OpenAlex Open Access 18 sitasi DOI
  3. Relationship between Grain Growth and Formation of Fracture Surface of Ultrafine Grained Cu in High-Cycle Fatigue

    Key engineering materials

    OpenAlex Open Access DOI

2013 3

  1. Fatigue-induced grain coarsening and crack growth behavior in ultrafine-grained copper under different loading histories

    WOS.SCI Edition

    Web of Science 20 sitasi DOI
  2. Effects of grain refinement due to severe plastic deformation on the growth behavior of small cracks in copper

    WOS.SCI Edition

    Web of Science 29 sitasi DOI
  3. Fatigue-induced damage and crack growth mechanism in ultrafine grained copper processed by equal channel angular pressing(ECAP)

    OpenAlex

2012 4

  1. Formation behavior of different topographies of crack growth path under high and low cyclic stresses in ultrafine-grained copper

    WOS.SCI Edition

    Web of Science 9 sitasi DOI
  2. Statistical description of the effect of Zr addition on the behavior of microcracks in Cu-6Ni-2Mn-2Sn-2Al Alloy

    WOS.SCI Edition

    Web of Science 6 sitasi DOI
  3. 324 Fine microstructure of copper produced by a severe plastic deformation technique and its fatigue strength

    Kikai Zairyou, Zairyou Kakou Gijutsu Kouenkai kouen rombunshuu/Kikai Zairyo, Zairyo Kako Gijutsu Koenkai koen ronbunshu

    OpenAlex Open Access DOI
  4. SMALL CRACK GROWTH BEHAVIOR AND EVALUATION OF GROWTH RATE OF COPPER PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING

    International Journal of Modern Physics Conference Series

    OpenAlex DOI

2011 5

  1. Evaluation of crack growth rate and growth model of ultrafine grained copper

    WIT transactions on modelling and simulation

    OpenAlex Open Access 1 sitasi DOI
  2. Change in surface states of ultrafine grained copper due to cyclic stresses

    WIT transactions on engineering sciences

    OpenAlex Open Access DOI
  3. G030132 Growth Mechanism of Small Cracks in Ultrafine Grained Copper processed by ECAP

    The Proceedings of Mechanical Engineering Congress Japan

    OpenAlex Open Access DOI
  4. OS2606 Effect of Trace Zr on the Crack Initiation and Microcrack Propagation Behavior of Cu-6Ni-2Sn-2Mn-2Al Alloy

    The Proceedings of the Materials and Mechanics Conference

    OpenAlex Open Access DOI
  5. OS3-11 Effects of Stress Amplitudes on the Crack Growth Behavior of Ultrafine Grained Copper

    The Proceedings of Conference of Kyushu Branch

    OpenAlex Open Access DOI

Tanpa tahun 1

  1. 036 Effect of Pre-stressing on the Growth Direction of Surface Cracks in Ultrafine Grained Copper

    Gruppo Italiano Frattura Digital Repository (Gruppo Italiano Frattura)

    OpenAlex Open Access

Ditarik otomatis dari profil publik SINTA dan OpenAlex pada 16 November 2026. Daftar ini memuat karya terindeks yang ditampilkan SINTA tanpa masuk akun, sehingga jumlahnya dapat lebih sedikit daripada total di atas. Lihat seluruh publikasi fakultas.

Satu Program Studi

Rekan Sejawat